Blog

Production realities, engineering approaches, and project references. Articles that summarize how we work.

Cross-section of an underwater composite sensor housing showing the body, end cap, seal and cable penetration
23 September 2026

Sealing Underwater Composite Housings: Designing the Body, Flange and Connections Together

Close-up showing the profile and surface details of a carbon foil wing
7 September 2026

Why Profile Accuracy, Surface Quality and Stiffness Are Handled Together in Carbon Foil Production

Representative geometry comparison showing bending and twisting in a composite propeller blade
21 August 2026

Bending and Twisting in Carbon Fiber Propellers: Is the Designed Geometry Preserved in Operation?

Composite propeller test rig set up for thrust and power measurements
5 August 2026

How to Read Propeller Test Results: What Thrust, Torque, RPM and Power Tell You Together

Material, tooling and inspection tools that make up the cost of a composite part
19 July 2026

What Makes Up the Cost of a Composite Part? The Share of Material, Tooling, Labor and Inspection

Checking the critical dimensions of a carbon fiber part
3 July 2026

Quality Control for Composite Parts: Why a Good-Looking Surface Is Not Enough

Representative cross-sections of bonded, bolted and insert joints in composite parts
16 June 2026

Joint Design for Composite Parts: When to Use Bonding, Bolts and Metal Inserts

Comparison of a clean carbon fiber CNC-cut edge and an edge with delamination
31 May 2026

Managing Edge Quality and Delamination in Carbon Fiber CNC Machining

A composite part production mold and a demolded carbon fiber part
14 May 2026

How to Choose a Mold for a Composite Part: Comparing Aluminum and Composite Tooling

Vacuum bag, sealant tape and pressure measurement fitting on a composite mold
28 April 2026

Vacuum Leaks in Composite Manufacturing: How to Manage a Problem That Affects Part Quality

Vacuum infusion, vacuum bagging and hot press production setups
11 April 2026

Vacuum Infusion, Vacuum Bagging and Hot Pressing: Which Method for Which Part?

Cross-section comparison of a solid laminate and foam- and honeycomb-core sandwich panels
26 March 2026

Sandwich Composite Structures in UAV Airframes: How to Choose Between Foam, Honeycomb and Solid Laminate

Arms and center plates of a disassembled carbon fiber FPV drone frame
9 March 2026

Balancing Low Weight, Impact Resistance and Vibration in an FPV Drone Frame

Surface textures and edge sections of carbon fiber plates in different thicknesses
21 February 2026

Choosing a Carbon Fiber Plate: How to Evaluate Thickness, Weave and Laminate Structure

Selecting a UAV Propeller: How Diameter, Pitch, Blade Count and Mission Profile Must Be Evaluated Together
5 February 2026

Selecting a UAV Propeller: How Diameter, Pitch, Blade Count and Mission Profile Must Be Evaluated Together

Carbon Fiber, Wood and Plastic Propellers: Which Material Suits Which Platform?
29 January 2026

Carbon Fiber, Wood and Plastic Propellers: Which Material Suits Which Platform?

Why Is Platform-Specific Propeller Design Different from an Off-the-Shelf Propeller?
22 January 2026

Why Is Platform-Specific Propeller Design Different from an Off-the-Shelf Propeller?

How Can Noise and Vibration Be Reduced in UAV Propellers?
15 January 2026

How Can Noise and Vibration Be Reduced in UAV Propellers?

Carbon Fiber Tube Design: Fiber Orientation, Wall Thickness and Connection Regions
8 January 2026

Carbon Fiber Tube Design: Fiber Orientation, Wall Thickness and Connection Regions

From Composite Prototype to Series Production: A Roadmap of Mold, Process and Quality Control
18 December 2025

From Composite Prototype to Series Production: A Roadmap of Mold, Process and Quality Control

Composite Material Selection in Marine Applications: Salt Water, Impact, Fatigue and Corrosion
11 December 2025

Composite Material Selection in Marine Applications: Salt Water, Impact, Fatigue and Corrosion

How Do Hydrofoil Systems Work? The Role of the Wing, Mast, Strut and Control System
4 December 2025

How Do Hydrofoil Systems Work? The Role of the Wing, Mast, Strut and Control System

How to Prepare a Proper RFQ for a Composite Part: Information That Speeds Up the Quote and Development Process
27 November 2025

How to Prepare a Proper RFQ for a Composite Part: Information That Speeds Up the Quote and Development Process